Exterior Painting Process

(Specific steps may vary but here’s our typical game plan!)

- Apply a biodegradable cleaner to break down dirt, mould, and buildup.

- Use a pressure washer to remove dirt and any loose paint.

- Rinse windows and fixtures to ensure no residue is left behind.

- Pick up and properly dispose of paint chips.

- Upon request (and if noted in the contract), we can clean concrete and/or decks.

- Allow the home to fully dry before moving to the next step.

- Scrape or wire brush flaky paint to create a smooth foundation.

- Feather sand edges of existing paint for a seamless transition between the painted surface and raw substrate.

- Spot prime or fully prime (depending on the condition of the surface) using Bond Primer.

- Caulk expansion gaps, corners, windows, and siding joints (for cedar siding, we caulk where two pieces meet).

- Once preparation is complete, we’re confident in the quality of the work, which allows us to provide a written warranty.

- Mask off unpainted surfaces using plastic and paper.

- Cover decks, patios, furniture, and driveways to prevent overspray.

- Mask light fixtures for a clean, polished result.

- Apply paint by brush and roll or spray, depending on the project scope.

- If spraying on porous surfaces (like cedar), we back brush/back roll to push the paint into the wood fibres for better adhesion.

- Two coats applied upon request or when recommended.

- In cooler temperature, we stop painting at least 2 hours before sunset to prevent surfactant leaching.

- Daily job site clean-up to keep the area organized.

- Collect and remove all garbage.

- Pick up any remaining paint chips.

- Remove plastic, tape, and coverings.

- Reinstall any hardware or furniture moved for the project.

Final Walk-Through:

- Coordinate a time with the client for a final inspection on the last day.

- Complete any touch-ups before packing up.

- Once the client is satisfied, the contract is signed, and they are invited to leave us a Google Review.